ALL Marine Ammeters

VDO Ammeter

• Scale: ± 60 amp
• Type: Electric
• Connection: .250" Spade
• Mounting Hardware: U-Bracket
• Diameter: 2 1⁄16" (52mm)
• Style: Vision Black

VDO Ammeter

• Scale: ± 100A
• Voltage: 12V
• Connection: .250" Spade
• Diameter: 2 1⁄16" (52mm)
• Included: U-Bracket (Mounting Hardware)
• Does Not Require External Shunt
• Series: Vision Black

VDO Ammeter

• Scale: ±30A
• Does Not Require External Shunt
• Voltage: 12V
• Diameter: 2 1⁄16" (52mm)
• Connection: M5 stud
• Mounting Hardware: U-Bracket
• Style: Cockpit International

VDO Cockpit International 60A Ammeter, Does Not Require External Shunt, 12V, 2 1/16" (52mm) 

These ammeters contain a built in internal shunt, eliminating the need for an external shunt or additional wiring.

VDO 30A Shunt For Viewline Ammeter

• Not Compatible With Vision, Cockpit, or Series 1 Gauges

VDO Shunt For VDO Viewline Ammeter

• Amperage: 60A
• Not Compatible With Vision, Cockpit Or Series 1 Gauges

VDO Shunt For VDO Viewline Ammeter

• Amperage: 100A
• Not Compatible With Vision, Cockpit Or Series 1 Gauges

VDO 150A Shunt For Viewline Ammeter

• Not Compatible With Vision, Cockpit, or Series 1 Gauges

Stewart Warner Deluxe™ Ammeter, Scale: 60-0-60 A, Diameter: 2 1/16" (52mm), Volt/Watt/Current: 12 V, Bezel/Finish: Polished 

Note:
- Corrosion resistant coating for marine use
- Internally shunted
 

Stewart Warner Deluxe™ Ammeter, Scale: 60-0-60 A, Diameter: 2 1/16", Volt/Watt/Current: 12 V, Bezel/Finish: Polished 

Note:
- Marine version includes additional corrosion protection.
- 12V or 24V light kits are sold separately. These are available for 5/8” and 1/2” light holes, in single-wire (grounds to gauge case) or two-wire (when ground cannot be made via gauge case) configurations.

VDO Ammeter

• Scale: ± 150A
• Diameter: 2 1⁄16" (52mm)
• Series: SingleViu
• 60mV shunt required (VDO 391-303). Switchable to CAN J1939
• Input ohm curve can be modified with SingleViu Configuration Tool
• RGB LED illumination (default illumination set to white)
• Programmable warning light
• Water resistant front & rear
• Works on both 12V or 24V systems
• Requires standard Molex MX 150 waterproof connector (sold separately)
• Also available with harness: A2C3833060030 (preset to mV input for use with 391-303 shunt)

VDO Ammeter

• Scale: ± 150A
• Diameter: 2 1⁄16" (52mm)
• Series: SingleViu
• Preset to mV input for use with 391-303 shunt
• Harness included
• 60mV shunt required (VDO 391-303)
• Switchable to CAN J1939
• Input ohm curve can be modified with SingleViu Configuration Tool
• RGB LED illumination (default illumination set to white)
• Programmable warning light
• Water resistant front & rear
• Works on both 12V or 24V systems
• Requires standard Molex MX 150 waterproof connector (sold separately)
• Also available without harness: A2C3833060001