ALL Marine Gauges

VDO Generator Drive Key

• .203-Tang

  VDO is phasing out this product - order now!  

VDO: GENERATOR SENDER, BLOCKING OSCILLATOR TYPE, 90MM LONG, 8-15V, M18X1.5

Special Order- requires additional lead time

VDO Tachometer/Speedometer Sender

• Sender type: Blocking Oscillator - 400Hz
• Length: 63mm
• Thread: M18 x 1.5 Male
• Power supply: 8 - 15V Stabilized
• Sensor signal: 2-pole insulated return
• Connector: Bayonet 4-pole 2.8mm
• For use with VDO speedometers and tachometers designated as generator-type (4 pulses per revolution)

VDO: GENERATOR SENDER, BLOCKING OSCILLATOR TYPE, 25MM LONG, 8-15V, M18X1.5

Special Order- requires additional lead time

VDO: GENERATOR SENDER, BLOCKING OSCILLATOR TYPE, 90MM LONG, 5-30V, M18X1.5

Special Order- requires additional lead time

VDO GPS Speed Sender

• Adds GPS Accuracy to VDO Electronic Speedometers
• Green, Orange, Red status LED
• 6ft (2m) shielded cable
• Compatible with all current and previous VDO electronic speedometers, as well as some non-VDO speedometers
• Low current draw, less than 10mA (at 12 volts)
• Voltage: 12V

Click Here for installation instructions

VDO Inductive Tachometer / Speedometer Sender

• Sender type: Inductive - 250Hz
• Thread: M18 x 1.5
• Resistance: 1.050 ± 100 Ohm
• Sensor signal: 2-pole insulated return
• Connector: Kostal 2-pole pin 4mm

  When NOT in stock, our normal lead time is 4 - 6 weeks  

VDO Inductive Sender

• Sender type: Inductive - 250Hz
• Application: Tachometer - Speedometer
• Thread: M18 x 1.5
• Length: 71.4mm
• Resistance:  100Ω ± 1.050
• Sensor signal: 2-pole insulated return
• Connector: Kostal 2-pole pin 4mm

VDO Inductive Sender

• Sender type: Inductive - 250Hz
• Length: 28.5mm
• Thread: M18 x 1.5
• Resistance: 1.050 ± 100 Ohm
• Sensor signal: 2-pole insulated return
• Connector: 2 Spades 6.3 x 0.8mm

VDO Tachometer/Speedometer Sender

• Sender type: Inductive - 250Hz
• Thread: M18 x 1.5
• Length: 34mm
• Resistance: 1.050 ± 100Ω
• Sensor signal: 2-pole insulated return
• Connector: 2 Spades 6.3x0.8mm
• For inductive and programmable speedometers and tachometers

VDO Inductive Sender

• Sender type: Inductive - 250Hz
• Thread: 3⁄4" -16 UNF-2A
• Resistance: 1.050Ω ± 100Ω
• Sensor signal: 2-pole insulated return
• Length: 34mm (1 1⁄3")
• Connector: 2x Spades (6.3 x 0.8mm)

VDO Inductive Sender

• Sender type: Inductive - 250Hz
• Length: 34mm
• Thread: M18 x 1.5
• Resistance: 1.050 ± 100 Ohm
• Sensor signal: 2-pole insulated return
• Connector: (2) Blades 6.3 x 0.8mm

VDO Inductive Tachometer/Speedometer Sender

• Sender type: Inductive - 250Hz
• Thread: M18 x 1.5
• Length: 70.7mm
• Resistance: 1.050 ± 100Ω
• Sensor signal: 2-pole insulated return
• Connector: 2 Spades 6.3mm & 4.8mm
• For inductive and programmable speedometers and tachometers

VDO Inductive Sender

• Length: 25mm
• Sender type: Inductive - 250Hz
• Thread: M18 x 1.5
• Resistance: 1.050 ± 100 Ohm
• Sensor signal: 2-pole insulated return
• Connector: AMP 2-pole pin 1.6mm

VDO Inductive Sender, 70.7mm Long, AMP Connector, M18x1.5

VDO Generator Type Sender 3000RPM

VDO Oil Pressure Gauge

• Scale: 5 Bar
• Type: Electrical
• Use with VDO Sender
• Voltage: 12V
• Ohm Range: 10Ω - 180Ω
• On Dial: Oil Symbol
• Terminal: .250" Spade
• Diameter: 2 1⁄16 (52mm)
• Style: Vision Black

VDO Oil Pressure Gauge

• Scale: 0 -  80 PSI
• Use with Marine 240-33 Ohm Sender
• Replaces most original equipment oil pressure gauges without any modifications
• Voltage: 12V
• Connection: M4 Stud
• Included : Mounting Hardware
• Diameter: 2 1⁄16" (52mm)
• Dial Face: White
• Bezel: Chrome
• Style: Cockpit Marine

VDO Oil Pressure Gauge

• Scale: 0 - 100 PSI
• Voltage: 12V
• Ohm Range: 10Ω - 180Ω
• Diameter: 2 1⁄16" (52mm)
• Connection: .250" Spade
• Included: Spin-Lok™ (Mounting Hardware)
• Series: Vision Black

VDO Oil Pressure Gauge

• Scale: 0 - 150 PSI
• Voltage: 12V
• Connection: .250" Spade
• Diameter: 2 1⁄16" (52mm)
• Included: Spin-Lok™ (Mounting Hardware)
• Series: Vision Black

  VDO is phasing out this product - order now!